HES 4500C Electric Strike COMPLETE KIT combination unit

Hes 4500C

The low profile, heavy duty, fire-rated solution

The 4500C series electric strike is designed for installation in 2" UL 10C fire-rated frames with ½" drywall penetration. The 4500C features a low profile 1-3/8" depth, heavy-duty stainless steel construction. Its strength is derived from a unique keeper pin locking design, enabling the 4500C to exceed the ratings of the frame, door and locking hardware. The 4500C comes with two faceplates designed to accommodate either cylindrical or mortise locksets up to a 3/4" throw latchbolt.

Specifications

• UL?10C fire rated, 3 hour (fail secure only)
• CAN4-S104 (ULC-S104) fire door conformant
• UL 1034 burglary resistant listed
• ANSI/BHMA A156.31, Grade 1 (#E09321, #E09322, #E09323)
• NFPA-252 fire door conformant
• ASTM-E152 fire door conformant
• California Fire Marshall Listed
• Patent #5,934,720

Frame application

• Metal
• Wood

Electrical

• .24 Amps @ 12VDC/VAC
• .12 Amps @ 24VDC/VAC
• DC continuous duty/AC intermittent duty only

Standard Features

• Stainless steel construction
• Tamper resistant
• Static strength 3,000 lbs.
• Dynamic strength 100 ft-lbs.
• Endurance 1,000,000 cycles
• Field selectable fail safe/fail secure
• Dual voltage 12 or 24 VAC/VDC
• Two faceplates provided to accommodate a variety of locksets
• Non-handed
• Internally mounted solenoid
• Accommodates up to a 3/4" latchbolt
• Strike body depth 1-3/8"
• Plug-in connector
• Trim enhancer
• Full keeper shims for horizontal adjustment
• Five year limited warranty

Optional Features

• LBM - Latchbolt monitor
• LBSM - Latchbolt strike monitor

Note: Relocation of the strike prep may be required for Schlage L Series and Yale 8700 mortise locks.  Consult HES customer support regarding use with Best 40 series.

Faceplate Options

The 4500 series is sold as a complete, pre-assembled model.

HES 4500 Technical Tip

It seems like every manufacturer of mortise locksets uses a different offset, or positions their deadlatch in a different place. This can make it difficult to align the strike body to the lockset.

To address this challenge, the 4500 electric strike opening can be adjusted to accommodate almost any mortise lockset, making installation a snap. The 4500 series comes with an assortment of filler blocks which are installed in the strike body. These filler blocks depress the deadlatch, and do not interfere with latch operation. The 4500 even includes a filler block for cylindrical locksets. This filler block covers up the blank spot in the strike opening, while leaving an opening for the latch in the center of the strike body.